Problems with PF 1942 and pedals

[newbie]

Hi guys

i am a newbie to scripting the devices from CH.

I have the usb combatstick 568 and the usb pro pedals, the combatstick works fine in BF 1942 and i use this script for POV hat:
http://www.ch-hangar.com/forum/index.php?showtopic=84

but i have one BIG problem!!!

I want to get right rudder when I step down on the right toe brake on the Pro Pedals and left rudder from the Left Toe Brake, is it possible ? (for the game Battlefield 1942)

This script dosent work:

SCRIPT

CMS.A1 = 128 + (JS2.A2/2) - (JS2.A1/2);

ENDSCRIPT

Can you help me please!?!?

thx :)

good bye

[MichaelCHProd]

Did you remember to set the CMS Axis number 1 to be DX Device "CM Device 1" and DX Axis to be"Z axis"

ftp://ftp.chproducts.com/pub/Postings/CMS_Axis.jpg

[newbie]

Thanx, your configuration works fine but when i use this i have no POV hat view??!!

It is no way, sorry but i use multible script .

i use the script for the POV .

and i want to use a nother script tu use the pedal brakes as a rudder when i put it down !

have you a step by step tip for me ??


this script :
http://www.ch-hangar.com/forum/index.php?showtopic=84

and this : CMS.A1 = 128 + (JS2.A2/2) - (JS2.A1/2);

can not use simultan!!!

I need a script to use the POV coolie hat (as a mouse view) and a script to use the left toe brake and the right toe brake as a left and right rudder when i but it down (NOT FORWARD)

THANX for your help and sorry for my bad english!

please help me

cu and good bye

thx

:)

// CMS Script File
//
// Game Title:
// Written By:
// Date:
//
script
// Move the POV off center and change the mouse to absolute
IF( JS1.B25 OR JS1.B26 OR JS1.B27 OR JS1.B28 OR JS1.B29 OR JS1.B30 OR JS1.B31 OR JS1.B32 ) THEN
XRELATIVE = FALSE; //Makes the mouse X axis absolute
YRELATIVE = FALSE; //Makes the mouse Y axis absolute
ELSE
cms.a1 = 128; //Makes the mouse X axis stop
cms.a2 = 128; //Makes the mouse Y axis stop
ENDIF

//If the mouse is absolute then the POV will move it.
IF( NOT XRELATIVE ) THEN
IF( js1.b32 or js1.b25 or js1.b26 ) THEN
cms.a2 = 72;
ENDIF
IF( js1.b26 or js1.b27 or js1.b28 ) THEN
cms.a1 = 184;
ENDIF
IF( js1.b28 or js1.b29 or js1.b30 ) THEN
cms.a2 = 184;
ENDIF
IF( js1.b30 or js1.b31 or js1.b32 ) THEN
cms.a1 = 72;
ENDIF
ENDIF

CMS.A1 = 128 + (JS2.A2/2) - (JS2.A1/2);

endScript

it works not fine, in the POV i have only up and down NO right and LEFT view!

[MichaelCHProd]

Here you go....

This is the Map, CMC, CMS and everything all set for your controllers. All you need to do is assign your buttons with the included CMC file. To do that you...

ftp://ftp.chproducts.com/pub/Postings/CMC%201.jpg

ftp://ftp.chproducts.com/pub/Postings/CMC%202.jpg

ftp://ftp.chproducts.com/pub/Postings/CMC%203.jpg

ftp://ftp.chproducts.com/pub/Postings/CMC%204.jpg


Now go do the rest of your buttons.

[newbie]

Great thanx BUT,


i have the combatstick NOT the fighterstick i have not the Throttle,
and my rudder dosent work with the left and right brake.

with your files, i have NO POV .

Whom i use this script ONLY :SCRIPT

// Move the POV off center and change the mouse to absolute
IF( JS1.B25 OR JS1.B26 OR JS1.B27 OR JS1.B28 OR JS1.B29 OR JS1.B30 OR JS1.B31 OR JS1.B32 ) THEN
XRELATIVE = FALSE; //Makes the mouse X axis absolute
YRELATIVE = FALSE; //Makes the mouse Y axis absolute
ELSE
cms.a1 = 128; //Makes the mouse X axis stop
cms.a2 = 128; //Makes the mouse Y axis stop
ENDIF

//If the mouse is absolute then the POV will move it.
IF( NOT XRELATIVE ) THEN
IF( js1.b32 or js1.b25 or js1.b26 ) THEN
cms.a2 = 72;
ENDIF
IF( js1.b26 or js1.b27 or js1.b28 ) THEN
cms.a1 = 184;
ENDIF
IF( js1.b28 or js1.b29 or js1.b30 ) THEN
cms.a2 = 184;
ENDIF
IF( js1.b30 or js1.b31 or js1.b32 ) THEN
cms.a1 = 72;
ENDIF
ENDIF

ENDSCRIPT


i HAVE a POV hat, but it is on the wrog button (coolie?)

see thi picture what i want:

http://www.leichtenstern.de/POV_hat_.jpg


but i need a nother script for my brakes to do left and right rudder !

i hope you understand me!?

I think i am a idiot but i will larning :wacko: to script CH products :thumbsup:

so

please help me.

i use your fles and i have no rudder on the brakes and no POV coolie hat (mouse view)

Sorry and good by with a hope for HELP.

i have buyed this devices 2 weks earlier, to control BF 1942 and cfs3.

cu

good bye

[MichaelCHProd]

Ok..... how about this........

[newbie]

Thats GREAT and it works FINE ! ! !

A BIG TAHNX :thumbsup: :cheers:

But i have one litle problem.

I want to uns fire on the fire button (button 1,see picture) and i go to download the map it comes a error message!

http://www.leichtenstern.de/error.jpg

I insert (with left mouse klick) the command FIRE on the fire button (Button 1, the yellow arrow) and a error message comes when i go to download !?

can you help me please !?


good bye

[MichaelCHProd]

My bad. :(

Typo in CMC file.

Here is the good one.

[newbie]

ok it works BUT

the MG's on the me109 are doing only one shot no rapid fire with the MG's on the airplane ---> one klick with butten 1 one shot, it is very bad!

but thanx fore the file

can you help me please a nother one??

good bye

[MichaelCHProd]

Try setting button 1 to be a mouse button. The CMC file characters cannot "hold" a mouse click.

ftp://ftp.chproducts.com/pub/Postings/Mouse%20click.jpg

[newbie]

HI Michael

A BIG THANK FOR YOU ! ! !

All works fine !

No problems now!

This is a good customer support, i say to all people " Buy CHProducts " and visit the CH HANGAR :thumbsup: :thumbsup:

Now i have one question :

how do i have to set up the script, so the right top coolie is doing the function which were done by the left bottom coolie before?!

ok thats al

Best greetings!

good bye

[MichaelCHProd]

Thank you.

You do not have to script tyhe top HAT if you are just going to program it to key strokes. For that you can do everything in the GUI. Just uncheck "Use as POV' and "Direct X" mode and program away with the CMC file.

[newbie]

Ok but i have one problem ,

i have the POV on the button HAT1, i need the POV on the standart POV coolie
mot on button HAT1 , the HAT1 is to hard to moving the POV buton is better
see picture

have you a script for me ?
click to see picture

My Webpage (http://www.leichtenstern.de/new_pov.jpg)


can you give me please a script to use it??

This are my files.

big thank and good bye must work now!

good bye

[MichaelCHProd]

Here you go..edited and tested.



For future knowledge the script you needed now was the one you quoted earlier on in this thread.


For some reason I cannot upload at the moment I will however keep trying. Just keep checking back here.

[newbie]

Yes i understand yur statement, but i have no source in german language, how to programm the products from CH.

This forum is the only help for me, and i thank you for you earlier help!!

Have you a guide in german language how to learn scripting and programming the products from CH; i will learn it ??!

It is very complex to configurate the ch products ,and i understand more , as before i come in the ch hangar, i am happy to find help here!

But this is the only i need: The POV collie use in BF1942 as the mouse look (with no shiftet button to press when i will use the POV ) !

ok i wait and pray for a help !

I testing programming self !

Good bye!

Martin Leichtenstern (real name)

[MichaelCHProd]

Martin, sorry brother I forgot all about you.

I was having some uploading issues today but they seem to have worked themselves out so here is what you are looking for....


I promise they are your files with the changed scripting.

Sorry brother B)

[newbie]

Ok that works fine thank you!

But i must hold the shift button (to turn on and off the POV view), what must i do to configurate the script to view with the POV without hold the shift button?!

can you help me again?!

good bye and thanks for help me!


Martin

[MichaelCHProd]

Oops missed one. :rolleyes:

Try this.......................

[newbie]

Oh yeah thats it ! :D

:thumbsup: :thumbsup: :thumbsup:

And now it is all pervect!

This support is great!

A very big thank for you i spend a beer (bavarian beer is the best beer at the world)

Have you a postal adress how to send a bottle beer to you ?!

I do it realy; but this is not a joke! :cheers:

Another question, can you give me a information to leran scripting the CH controlers.

For example a tutorial (in german language) how to learn scripting ch products?!

Anothe thank for your help :thumbsup:

and good bye Michael


Martin

[MichaelCHProd]

You can always ship beer to me :D

Michael Sexton
970 Park Center Drive
Vista, CA 92081
USA

I think I might know someone who speaks German and is pretty good with scripting... cough.. Don... cough. Maybe I could help him out with some controllers if he can help me out with a German Scripting How-To.