Silent Hunter 3

[MFreywald]

Wasn't sure where to stick this one. So Ground profiles seemed the most logical.

This is a profile for using the USB Pro Throttle to control most the functions and area
switching.

I'm most proud of this one cause I have the throttle axis setup to perform somewhat
like a ships throttle.

by using the shift button you can control if the forward motion of the throttle is controlling going backwards or forwards.. I'll try to explain.

without the shift button being held (pinky button) the throttle axis goes like this from all the way back (towards you) to all the way forward.

All Stop, Ahead Slow, Ahead 1/3, Ahead Standard, Ahead Full.

With the button held it goes like this...same starting position (all the way back)

All Stop, Back Slow, Back 1/3, Back Standard, Back Full.


So essentially just like a ships throttle, if your at ahead full and want to go to back 1/3 you'll be going through the other positions.


Included in the zip is a PDF of the mappings, the CMS, MAP and a generic TXT file I include with each submitance.


Marty Freywald

Download Here (http://www.ch-hangar.com/files/Profiles/misc_profiles/SilentHunter3.zip)