Need help with FighterStick and LOMAC

[Ghost Rider]

I just received my CH Joystick today !!!

First I had tried it as Direct Mode. I assign fonction to the joystick directly in LOMAC.

Now I had found a CMC file and I use that file to create a Mapped configuration with the CH Control Manager.

So I created a .MAP file and then I load that in Control Manager and after I press the download button and it successfully load it.

After I check my button configuration on the key check and it is OK.

Then I go in LOMAC and I don't see the CH Joystick !!!

What i'm missing here ?
If i start a new MAP Profile and just save it as default in direct mode then I see it in LOMAC.

Thanks for the help !!

[Revvin]

Did you change any of the default key assignments in LOMAC? if I recall correctly there is a button to reset controls to default, try using hte profile after you've done that in LOMAC.

[531_Ghost]

Ghost Rider,

From one Ghost to another check this out:

Known Controller/Key Issues (http://www.simhq.com/simhq3/sims/boards/bbs/ultimatebb.php?ubb=get_topic;f=37;t=004531#000000)

[MichaelCHProd]

After you map the stick, before you go into LOMAC can you tell me is the stick listed in Game Controllers as "Control Manager Device 1" or is there nothing listed in Game Controllers?

[Ghost Rider]

Originally posted by MichaelCHProd@Feb 19 2004, 05:24 PM
After you map the stick, before you go into LOMAC can you tell me is the stick listed in Game Controllers as "Control Manager Device 1" or is there nothing listed in Game Controllers?
No the joystick was not appearing in the game controller.

But I have found the problem. I have no device assign to the FighterStick axes and also the axes was not in Directx mode.

So I fix the XYZ axes and set it to Direct mode and also to device 1 and i Press the mapped button and voila !!!

Thanks guys !

Now i'm waiting for my Throttle and for now I will use my Logitech Momo Racing gas & beake pedals for the rudder. I have try it and it work !!

[MichaelCHProd]

You are welcome B)