Sigma
28-01-2006, 10:36 AM
LOMAC 1.11 and Flaming Cliffs CH Profile by 169th Sigma
Fighter Stick - Pro Throttle - Pro Pedals (USB)
January 2006
Unpack the files where you keep your control manager maps.
Load it into the control manager 4 and push the download button in the control manager.
Start the game and chose CH control manager device 1 as your Input device.
Configure all your axis within the game.
The two leftmost buttons on the front of throttle handle are used as "shift buttons",
allowing three different "shifted modes" and the standard mode.
Mode 4 requires you to hold down three buttons at the same time to send commands.
The leftmost button is for mode 2 and the middle button is for mode 3.
I have included a script for wheelbreaks when you fully depress the rudder pedals.
I have included the cmc file so you can change this profile as you see fit.
There are commands linked to TrackIR and Teamspeak. These commands will need to be adjusted
within your teamspeak and TrackIR software.
TRACKIR_PAUSE KP-
TRACKIR_CENTER KP+
TEAMSPEAK SPEAK LALT
Hope you like it.
169th Sigma
sigma@169thpathers.net
Download Here (http://www.ch-hangar.com/files/Profiles/jet_sim_profiles/Lomac11_Sigma169.zip)
Fighter Stick - Pro Throttle - Pro Pedals (USB)
January 2006
Unpack the files where you keep your control manager maps.
Load it into the control manager 4 and push the download button in the control manager.
Start the game and chose CH control manager device 1 as your Input device.
Configure all your axis within the game.
The two leftmost buttons on the front of throttle handle are used as "shift buttons",
allowing three different "shifted modes" and the standard mode.
Mode 4 requires you to hold down three buttons at the same time to send commands.
The leftmost button is for mode 2 and the middle button is for mode 3.
I have included a script for wheelbreaks when you fully depress the rudder pedals.
I have included the cmc file so you can change this profile as you see fit.
There are commands linked to TrackIR and Teamspeak. These commands will need to be adjusted
within your teamspeak and TrackIR software.
TRACKIR_PAUSE KP-
TRACKIR_CENTER KP+
TEAMSPEAK SPEAK LALT
Hope you like it.
169th Sigma
sigma@169thpathers.net
Download Here (http://www.ch-hangar.com/files/Profiles/jet_sim_profiles/Lomac11_Sigma169.zip)