PDA

View Full Version : Pro Throttle USB

EAGLE
13-03-2004, 02:54 PM
The 3 buttons located on the back of the handle are soft and require a hard press.The clicking sound it used to make when pressed is gone.
Also the 8 way Hat is not functioning properly to my way of thinking? When moving
from different view areas it seems to slip into another view and then pops back. This is confusing the computer and it pauses for awhile then reverts back to normal functions.
Could the switching be at fault? The unit is only 1 year old.
If I could I would try another unit of the same kind and see if it works properly, but alas no one here close by that has this CH unit.

Thank you in advance,

EAGLE
MichaelCHProd
14-03-2004, 07:47 AM
This is the USB Pro Throttle right? When you check it in the Control Manager do you see it doing odd things when you move the POV?
EAGLE
14-03-2004, 05:34 PM
Checked the CMGr and the Pro Throttle shows no problem, all functions working as they should, will check programming etc.

Thanks for the reply Michael.

Eagle
MichaelCHProd
14-03-2004, 07:16 PM
Are you leaving the POV as a "POV" or are you programming it manually to some key strokes for view control?
EAGLE
17-03-2004, 03:14 AM
The POV on my 8 way Hat on Pro Throttle I programmed it for view locations:
Forward/Rear/Left/Right/and all 1/4 areas.
Example: KP2=Rear view
KP4=Left view
KP6=Right view
etc.

Do you see a problem with that? These are views for Aces Hi.
Should I leave this out and it will be auto?

Please advise.

Thanks EAGLE
MichaelCHProd
17-03-2004, 07:42 AM
I think you would be better off programming them in the Control Manager before you go into Aces High. After you programmed them do they work in the Key Tester? Does Aces High only see the commands if the numlock key is on (or off)?
EAGLE
17-03-2004, 07:19 PM
These have been programmed in CNTRL MGR.
EAGLE
MichaelCHProd
17-03-2004, 08:24 PM
But do they work in the Key Tester? ftp://ftp.chproducts.com/pub/Postings/CM_Key_Check.jpg

Should be the 11th icon in the Control Manager tool bar..
ftp://ftp.chproducts.com/pub/Postings/CM_Toolbar.jpg
EAGLE
18-03-2004, 10:32 PM
YEP, they ALL work in key tester.
Looks like I got ALL things functioning :rolleyes:

EAGLE
MichaelCHProd
18-03-2004, 10:58 PM
Cool B)