Revvin
19-08-2006, 05:31 PM
Using a profile you download from the internet requires only a few small steps. First you need to unzip the profile so Control Manager can use it. It's recommended that you unzip to your \Control Manager\Maps\ directory, by default Control Manager is installed to: C:\Program Files\CH Products\Control Manager\Maps. Once you have done this then start Control Manager from the shortcut on your desktop or Start Menu. Click the 'Load' button http://www.ch-hangar.com/SiteFiles/Images/faq/cmloadbtn.jpg to browse to the .map file you want to load, click on the .map file in the browser window and click 'Open'. Now the profile is loaded into Control Manager you now need to download it to your CH devices. To download a profile to your CH devices click on the 'Download' button http://www.ch-hangar.com/SiteFiles/Images/faq/cmdownloadbtn.jpg once the profile is downloaded to your CH devices (after a short pause) you will be shown a message window telling you that the download has been completed successfully. At this point you may close down Control Manager and load your game. Profiles such as the ones you will find on this site map all your games default commands to your CH devices so you should not need to alter any commands within your game except for mapping the joystick/throttle axis.