Revvin
19th August 2006, 06:01 PM
The green, amber and red LED's you see on the base of the Fighterstick and Pro Throttle are 'mode' indicator's. There are three because originally that was the maximum number of modes available but with a little .cms script you can add a fourth mode if you so wish. The LED's are hard wired to the mode selection buttons on the Fighterstick and Pro Throttle (button 3 on the Fighterstick and button 1 on the Pro Throttle) You can select which device changes modes by loading a profile and selecting the 'Program Settings' tab, there you will see a drop down menu box next to the heading 'Mode Control'.
http://www.ch-hangar.com/SiteFiles/Images/faq/mode_control_small.jpg (http://www.ch-hangar.com/SiteFiles/Images/faq/mode_control.jpg)
Be aware that if you select the Fighterstick to change modes only the LED's on the base of the Fighterstick will change colour, the LED's on the Pro Throttle if you have them will not change unless that is the device you chose to change modes.
http://www.ch-hangar.com/SiteFiles/Images/faq/mode_control_small.jpg (http://www.ch-hangar.com/SiteFiles/Images/faq/mode_control.jpg)
Be aware that if you select the Fighterstick to change modes only the LED's on the base of the Fighterstick will change colour, the LED's on the Pro Throttle if you have them will not change unless that is the device you chose to change modes.