HOTAS ala mode

[Null_â„¢]

Yo,

A little clarification is neccessary please. Just starting out with Control Manager and I don't know yet what I can and cannot do.

I do not wish to use button 3 on the Fighterstick or any other button on the fighterstick to change modes. I just want to use the ministick on the throttle so that the mode is changed on both devices at the same time.

Is it possible to setup my Fighterstick and Pro Throttle so that modes are changed in tandem only by the ministick on the throttle?

[Bob Church]

They're only changed by one device or the other, never both. The LEDs will track the button on whichever device they're on, but they won't sync between the throttle and the stick, and only one of them will actually control the mode. Click the Program Settings tab and look at the drop-down list, pick the controller you want to control them. That one will switch them, the other controllers button will just switch it's LEDs, the modes won't change.

- Bob

The StickWorks
http://www.stickworks.com

[Null_â„¢]

Thanks Bob. I figured that out just before I read your posting. Should've done a key check earlier. That would've saved a lot of time. It's too bad that both LED's don't sync up. That would be a nice enhancement. One can only hope. All-in-all though, I likes me HOTAS.