Click Start Enable no more working

[KPAX2004]

Hello,

For few days now, the "click start enable" button function does not work anymore. I have reinstalled everything but I still have the problem. I have a FS,PT and PP. Everything else seems to work correctly. When I push on button 1 of FS (first controller), the mode does not change from directX to Mapped as it should.

Any idea to solve my problem is welcome.

Have a nice day

[KPAX2004]

Me again,

Some more info : when I go in the test calibrate tool of control manager, I have (in direct mode) the following order for the devices :

1 PP (pedals)
2 PT (throttle)
3 FS (stick)

As I read some where on this board that clikcStart attaches itself to the first physical device I thonk that this is the problem. I have no button 1 on PP to check this. By the way, in windows xp pro I have in order : PT,PP,FS

Thanks for your help.

[Bob Church]

Yes, it's looking for the first physical device rather than the first logical device, and that's mainly a matter of luck with Windows. It's fixed in the 3.50 version that should get posted before too long, it goes with the throttle quadrant.

Try button 1 on whatever you've got, it should pick it up unless you got really unlucky and your pedals ended up in the number one physical slot. Then there's just no button 1 to click.

- Bob

The StickWorks
http://www.stickworks.com

[KPAX2004]

Hello,

Thank you. No button 1 is working so the click start is linked to my PP. It is not very important. I can do without it.

By the way, when will the throttle quadrant be available in Belgium (and so CM 3.5)?

It is always a relief to know that you can expect a response to your problems.

Thanks again and have a nice day.

[Bob Church]

>> Thank you. No button 1 is working so the click start is linked to my PP. It is not very important. I can do without it. <<

I saw by your listing that the ProPedals were at the top, though I&#39;m not sure that means anything, but it does sound like that&#39;s what&#39;s happening. Anyway, it will get fixed shortly.

>> By the way, when will the throttle quadrant be available in Belgium (and so CM 3.5)? <<

I don&#39;t know about the quadrant availabilty, really. You&#39;d need to talk to Michael or Debby. Version 3.50 should be up for download before that, though.

>> It is always a relief to know that you can expect a response to your problems.

Thanks again and have a nice day. <<

You, too, KPAX2004!

Best regards,

- Bob

The StickWorks
http://www.stickworks.com

[MichaelCHProd]

soon...I promise :)