No Throttle in LOMAC

[autie]

I have downloaded every profile/map I can find on the 'net and can't get the throttle to run with the A-10 in LOMAC. What am I doing wrong (as I am sure it is me). Throttle works fine in every other sim I have.

[II./JG1_Rudi]

Originally posted by autie@Jan 21 2004, 01:47 AM
I have downloaded every profile/map I can find on the 'net and can't get the throttle to run with the A-10 in LOMAC.ÂÂ* What am I doing wrong (as I am sure it is me).ÂÂ* Throttle works fine in every other sim I have.
In LOMAC, go to Options--Input and select CH Control Manager Device 1 (assuming you're running CH Control Manager) under Settings--Device. Click on the switch next to this device window to select Axes. Then make sure that "Thrust" is set to your throttle axis (probably "Axis2") in the Actions Map window.

Hope this helps.

[Solo]

Just on the odd chance you made the same boo boo I did, when you assign axes in the LOMAC Joystick assignments section, when it comes to doing the throttle you don't actually assign what you think the throttle axis is, you choose the throttle bit and then actually move the throttle and it picks it up.

I'm using an old gameport Pro Throttle and once I did this every thing worked fine.

[Solo]

Lol..sorry Rudi, didn't see your post. I didn't assign my axis, just moved the throttle and away I went. Worked for me.

[II./JG1_Rudi]

No worries, Solo...your tip may be easier!

[autie]

thanks guys i will try both tonight.

[MichaelCHProd]

When I combine my controllers into one device (like most of the LOMAC maps) I assign them in LOMAC and they look like this....ftp://ftp.chproducts.com/pub/LOMAC%20axis.jpg